Speed Limiting Devices For Zimbabwe
Speed Limiting Devices For Zimbabwe
Speed Limiting Devices For Zimbabwe
  • Charger l'image dans la galerie, Speed Limiting Devices For Zimbabwe
  • Charger l'image dans la galerie, Speed Limiting Devices For Zimbabwe
  • Charger l'image dans la galerie, Speed Limiting Devices For Zimbabwe

Speed Limiting Devices For Zimbabwe

Prix normal
$49.00
Prix réduit
$49.00
Prix normal
$89.00
Épuisé
Prix unitaire
par 

Zimbabwe has now require to install GPS speed limiting Device Standard Definitions:

“speed monitoring device” means a device and its accessories fitted on a public service vehicle capable of monitoring the speed of such vehicle and recording or storing the data thereof;

“speed limiting device” means a device and its accessories fitted on a public service vehicle capable of being set to control, limit the speed of such vehicle not to exceed 100km/h;

“operator” means anyone engaged in the business of transportation for hire and reward as provided for in the Road Motor Transportation Act [Chapter 13:15];

“certificate of fitness” means a certificate of fitness issued in terms of section 31 of the Road Motor Transportation Act [Chapter 13:15];

“inspection officer” means a person who is appointed or deemed to have been appointed as an inspecting officer in terms of section 30 of the Road Motor Transportation Act [Chapter 13:15];

“Commissioner” means the Commissioner of Road Transport referred to in section 3 of the Road Motor Transportation Act [Chapter 13:15].

Uniguard has been in GPS speed limiter business since 2019, we have done project in Ethiopia, Kenya and Ghana.

Zimbabwe  GPS Speed limiting device features:

1 Speed Limiter

Enforce to limit the speed of your vehicle if preset maximum speed 

2 Tamper proof

Maximum speed is 40km/h if maximum speed is tampered or sensor is cut.

3 Download data

Data can be stored for 72 hours at interval of 5 seconds.

Data can be retrieved by connecting device to computer via USB data port 

4 Wireless Printer

Violations can be printed out for the last one-hour driving. Portable printer prevents drivers from printing

Speed violations can be printed

5 Violations alarm

All violations will be transmitted to platform.

6 Over speed alarm with buzzer

When vehicle reaches 95% of preset speed limit, built-in buzzer shall make sound alarm to warn driver.

7 Fuel monitoring (optional)

Monitor vehicle fuel consumption. Need connect with fuel sensor that gives out analog voltage.

Real time fleet tracking Working power: 2W 

GPS speed limiter specs:

Name

UT04S GPS Speed Limiting Device

Weight

191g

Dimension

110*75*30 mm

Working voltage

DC 9V-36V

Backup battery

800mAh 3.7V

Battery working time

4hrs

Working current

60~150mA

Standby current

16mA

Charging current

Max < 500mA

Input Fuse

2A

Working power

2W

Working Temp.

-45~85

GSM Frequency

850/900/1800/1900 Mhz

Max RF output

33.0dBm±2dBm

Dynamic input range

-15 ~ -102dBm

GPS chipset

Ublox 7

GPS frequency

L1, 1575.42 MHz

GPS accuracy

5 meters at 2D RMS

 

 

 

Interface

1 A/D Port for fuel monitoring

1 Interface for data config by PC

1 USB port for USB disk data download

2 Port for speed limit

1 Input for speed signal

1 Input for Bluetooth Printing control

Built in Flash

Store data of last 72hrs, above 5000 points

Built in Buzzer

Sound alarm when speed reaches 95% of set value

Alarm

External power cut, Lower battery, Over speed, Geo-fence

Tracking method

Real time on Web Software and Phone APP

Account level

Unlimited sub account management

Report

Trip report, Speed report, Geo-fence report, Parking report, Driving Report, Alarm report, Mileage report, Engine Idle report

 

GPS speed limiter connection:

 gps speed limiter

ACC: (Orange) connected to vehicle ACC wire to detect engine ON/OFF

PULSE: (Purple) connected to vehicle speed signal wire to detect speed

GND / DC+: (Red and Black) connected to battery positive and ground.

GND / SOS: connected together with SOS button to control wireless printing. (With wireless Bluetooth printer turned on, press SOS button for 3 seconds, device shall beep, in 15 seconds device shall print last 1 hr data including over speed data. Long beep once all data is printed.)

NC / NO: (Green / Yellow) cut off fuel pump power wire, connect NO Yellow wire to the cut point, working as a power supply to fuel pump. (Relay and buzzer are built-in, when speed reaches 95% preset value, beep; 100% speed reached, built-in relay is activated with continuous beep.

Fuel (Grey) connect with fuel sensor signal wire to monitor fuel consumption (Optional)

 SIM slot: insert SIM card

Micro USB: connect device to PC for config

USB disk: insert USB disk for data download (beep sound after inserting, long beep once all data is downloaded.)

SW: built-in backup battery switch. (Default OFF)

RESET: one click to restart device

 LED: Blue for GPS (ON if signal okay), Green for GSM (slow flash if signal okay)